1. Press the Power key on the receiver and transmitters to power on. After power is on, the receiver and transmitters will be automatically connected without pairing, and the corresponding microphone indicator on the receiver is always on.
Figure 1-5 RX Power Key |
Figure 1-6 TX Power Key |
2.Using the camera adapter cable to connect the receiver and the camera, as shown in Figure 1-7.
Figure 1-7 RX Connect Camera
3.Open the camera to record video and clip the transmitter to the collar to start recording.
Note: The microphone defaults to NR noise reduction recording mode when it is turned on for the first time. Press the dB key to adjust the radio level and press twice the dB key to switch the NR/Reverb mode.
Figure 1-8 TX Recording
Comments
0 comments
Please sign in to leave a comment.